quick turn prototype & mass production for SMT PCB Assembly 6 PCB Assembly lines
Detail Specifications:
| Layers | 2 |
| Material | FR-4 |
| Board Thickness | 1.6mm |
| Copper Thickness | 1oz |
| Surface Treatment | HASL LF |
| Soldmask & Silkscreen | Green & White |
| Quality Standard | IPC Class 2, 100% E-testing |
| Certificates | TS16949, ISO9001, UL, RoHS |
What KAZ Circuit can do for you:
- PCB & PCBA Design
- PCB manufacturing (prototype, small to medium, mass production)
- Components Sourcing
- PCB Assembly/SMT/DIP
To get a full quotation of the PCB/PCBA, pls provide the
information as below:
- Gerber File, with detail specification of the PCB
- BOM List (Better with excel fomart)
- Photoes of the PCBA (If you have done this PCBA before)
Manufacturer Capacity:
| Capacity | Double Sided: 12000 sq.m / month
Multilayers: 8000sq.m / month |
| Min Line Width/Gap | 4/4 mil (1mil=0.0254mm) |
| Board Thickness | 0.3~4.0mm |
| Layers | 1~20 layers |
| Material | FR-4, Aluminum, PI |
| Copper Thickness | 0.5~4oz |
| Material Tg | Tg140~Tg170 |
| Max PCB Size | 600*1200mm |
| Min Hole Size | 0.2mm (+/- 0.025) |
| Surface Treatment | HASL, ENIG, OSP |
SMT Capacity
SMT (Surface Mount Technology) PCB assembly is a method of
populating and soldering electronic components onto a printed
circuit board (PCB). In SMT assembly, components are mounted
directly onto the surface of the PCB rather than passing through
holes as in through-hole assembly. SMT is widely used in modern
electronics manufacturing due to its advantages in terms of
component size, density, and automation. Here are the key steps
involved in SMT PCB assembly:
Stencil Printing: The first step is to apply solder paste onto the
PCB. A stencil, typically made of stainless steel, is aligned over
the PCB, and solder paste is deposited through the openings in the
stencil onto the solder pads. The solder paste contains tiny solder
particles suspended in flux.
Component Placement: Once the solder paste is applied, an automated
component placement machine, also known as a pick-and-place
machine, is used to accurately position and place the SMT
components onto the solder paste. The machine picks up the
components from reels, trays, or tubes and precisely places them on
the designated locations on the PCB.
Reflow Soldering: After component placement, the PCB with the
solder paste and components goes through a reflow soldering
process. The PCB is subjected to controlled heating in a reflow
oven, where the solder paste undergoes a phase change from a paste
to a molten state. The molten solder forms metallurgical bonds
between the component leads and the PCB pads, creating reliable
electrical and mechanical connections.
Inspection and Testing: Following the reflow soldering process, the
assembled PCB is inspected and tested for quality assurance.
Automated optical inspection (AOI) systems or other inspection
methods are used to detect solder defects, such as insufficient or
excessive solder, misaligned components, or solder bridges.
Functional testing may also be performed to verify the
functionality of the assembled PCB.
Additional Processing: Depending on the specific requirements of
the PCB assembly, additional steps may be carried out, such as
conformal coating application, cleaning, or rework/repair for any
identified defects. These steps ensure the final quality and
reliability of the SMT assembly.
SMT PCB assembly offers several advantages, including higher component density,
reduced manufacturing costs, improved signal integrity, and
increased production efficiency. It enables the assembly of smaller
and lighter electronic devices with enhanced performance.
Photoes of this quick turn prototype & mass production for SMT PCB Assembly 6 PCB Assembly lines
